Login
Order Now

Our Services

Get 15% Discount on your First Order

Order Now

Lab – Building a Switch and Router Network Lab – Building a Switch and Router Network Topology

Lab – Building a Switch and Router Network

Lab – Building a Switch and Router Network

Topology


Addressing Table

Device

Interface

IP Address

Subnet Mask

Default Gateway

R1

G0/0

192.168.0.1

255.255.255.0

N/A

G0/1

192.168.1.1

255.255.255.0

N/A

PC-A

NIC

192.168.1.3

255.255.255.0

192.168.1.1

PC-B

NIC

192.168.0.3

255.255.255.0

192.168.0.1

Objectives

Part 1: Set Up the Topology and Initialize Devices

Part 2: Configure Devices and Verify Connectivity

Part 3: Display Device Information

Background / Scenario

This is a comprehensive lab to review previously covered IOS commands. In this lab, you will cable the equipment as shown in the topology diagram. You will then configure the devices to match the addressing table. After the configurations have been saved, you will verify your configurations by testing for network connectivity.

After the devices have been configured and network connectivity has been verified, you will use IOS commands to retrieve information from the devices to answer questions about your network equipment.

This lab provides minimal assistance with the actual commands necessary to configure the router. Test your knowledge by trying to configure the devices without referring to the content or previous activities.

Note: The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Other routers, switches, and Cisco IOS versions can be used. Depending on the model and Cisco IOS version, the commands available and output produced might vary from what is shown in the labs. Refer to the Router Interface Summary Table at the end of this lab for the correct interface identifiers.

Note: Ensure that the routers and switches have been erased and have no startup configurations. Consult with your instructor for the procedure to initialize and reload a router and switch.

Required Resources

1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)

1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)

2 PCs (Windows 7 or 8 with terminal emulation program, such as Tera Term)

Console cables to configure the Cisco IOS devices via the console ports

Ethernet cables as shown in the topology

Note: The Gigabit Ethernet interfaces on Cisco 1941 routers are autosensing and an Ethernet straight-through cable may be used between the router and PC-B. If using another model Cisco router, it may be necessary to use an Ethernet crossover cable.

Set Up Topology and Initialize Devices

Cable the network as shown in the topology.

Attach the devices shown in the topology diagram, and cable, as necessary.

Power on all the devices in the topology.

Initialize and reload the router and switch.

If configuration files were previously saved on the router and switch, initialize and reload these devices back to their basic configurations.

Configure Devices and Verify Connectivity

In Part 2, you will set up the network topology and configure basic settings, such as the interface IP addresses, device access, and passwords. Refer to the Topology and Addressing Table at the beginning of this lab for device names and address information.

Assign static IP information to the PC interfaces.

Configure the IP address, subnet mask, and default gateway settings on PC-A.

Configure the IP address, subnet mask, and default gateway settings on PC-B.

Ping PC-B from a command prompt window on PC-A.

Why were the pings not successful?

____________________________________________________________________________________

Configure the router.

Console into the router and enable privileged EXEC mode.

Enter configuration mode.

Assign a device name to the router.

Disable DNS lookup to prevent the router from attempting to translate incorrectly entered commands as though they were host names.

Assign
class as the privileged EXEC encrypted password.

Assign
cisco as the console password and enable login.

Assign
cisco as the VTY password and enable login.

Encrypt the clear text passwords.

Create a banner that warns anyone accessing the device that unauthorized access is prohibited.

Configure and activate both interfaces on the router.

Configure an interface description for each interface indicating which device is connected to it.

Save the running configuration to the startup configuration file.

Set the clock on the router.

Note: Use the question mark (
?) to help with the correct sequence of parameters needed to execute this command.

Ping PC-B from a command prompt window on PC-A.

Were the pings successful? Why?

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

Display Device Information

In Part 3, you will use
show commands to retrieve information from the router and switch.

Retrieve hardware and software information from the network devices.

Use the
show version command to answer the following questions about the router.

What is the name of the IOS image that the router is running?

____________________________________________________________________________________

How much DRAM memory does the router have?

____________________________________________________________________________________

____________________________________________________________________________________

How much NVRAM memory does the router have?

____________________________________________________________________________________

How much Flash memory does the router have?

____________________________________________________________________________________

Use the
show version command to answer the following questions about the switch.

What is the name of the IOS image that the switch is running?

____________________________________________________________________________________

How much dynamic random access memory (DRAM) does the switch have?

____________________________________________________________________________________

How much nonvolatile random-access memory (NVRAM) does the switch have?

____________________________________________________________________________________

What is the model number of the switch?

____________________________________________________________________________________

Display the routing table on the router.

Use the
show ip route command on the router to answer the following questions.

What code is used in the routing table to indicate a directly connected network? _____

How many route entries are coded with a C code in the routing table? _________

What interface types are associated to the C coded routes?

_______________________________________________________________________________________

Display interface information on the router.

Use the
show interface g0/1 to answer the following questions.

What is the operational status of the G0/1 interface?

_______________________________________________________________________________________

What is the Media Access Control (MAC) address of the G0/1 interface?

_______________________________________________________________________________________

How is the Internet address displayed in this command?

_______________________________________________________________________________________

Display a summary list of the interfaces on the router and switch.

There are several commands that can be used to verify an interface configuration. One of the most useful of these is the
show ip interface brief command. The command output displays a summary list of the interfaces on the device and provides immediate feedback to the status of each interface.

Enter the
show ip interface brief command on the router.

R1#
show ip interface brief

Interface IP-Address OK? Method Status Protocol

Embedded-Service-Engine0/0 unassigned YES unset administratively down down

GigabitEthernet0/0 192.168.0.1 YES manual up up

GigabitEthernet0/1 192.168.1.1 YES manual up up

Serial0/0/0 unassigned YES unset administratively down down

Serial0/0/1 unassigned YES unset administratively down down

R1#

Enter the
show ip interface brief command on the switch.

Switch#
show ip interface brief

Interface IP-Address OK? Method Status Protocol

Vlan1 unassigned YES manual up up

FastEthernet0/1 unassigned YES unset down down

FastEthernet0/2 unassigned YES unset down down

FastEthernet0/3 unassigned YES unset down down

FastEthernet0/4 unassigned YES unset down down

FastEthernet0/5 unassigned YES unset up up

FastEthernet0/6 unassigned YES unset up up

FastEthernet0/7 unassigned YES unset down down

FastEthernet0/8 unassigned YES unset down down

FastEthernet0/9 unassigned YES unset down down

FastEthernet0/10 unassigned YES unset down down

FastEthernet0/11 unassigned YES unset down down

FastEthernet0/12 unassigned YES unset down down

FastEthernet0/13 unassigned YES unset down down

FastEthernet0/14 unassigned YES unset down down

FastEthernet0/15 unassigned YES unset down down

FastEthernet0/16 unassigned YES unset down down

FastEthernet0/17 unassigned YES unset down down

FastEthernet0/18 unassigned YES unset down down

FastEthernet0/19 unassigned YES unset down down

FastEthernet0/20 unassigned YES unset down down

FastEthernet0/21 unassigned YES unset down down

FastEthernet0/22 unassigned YES unset down down

FastEthernet0/23 unassigned YES unset down down

FastEthernet0/24 unassigned YES unset down down

GigabitEthernet0/1 unassigned YES unset down down

GigabitEthernet0/2 unassigned YES unset down down

Switch#

Reflection

If the G0/1 interface showed administratively down, what interface configuration command would you use to turn the interface up?

_______________________________________________________________________________________

What would happen if you had incorrectly configured interface G0/1 on the router with an IP address of 192.168.1.2?

_______________________________________________________________________________________

_______________________________________________________________________________________



© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page
1 of
5

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page
5 of
5

image1.png

image2.jpeg

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Order Now

Related Questions

begin working on elements of the service plan for the

Premium Paper Help is a professional writing service that provides original papers. Our products include academic papers of varying complexity and other personalized services, along with research materials for assistance purposes only. All the materials from our website should be used with proper references.

there are two posts . post 1 and post 2.

there are two posts . post 1 and post 2. make sure to reply those posts with 150 words each with references and in text citations post 1 The goal of the respiratory system is to supply the body with the right amount of oxygen. It works hand in hand

Refer to section “The WH Framework for Business Ethics” of

  Refer to section “The WH Framework for Business Ethics” of Ch. 2, “Business Ethics,” of Dynamic Business Law for information on the WH Framework. For this assignment, refer to the scenario located in the “Questions & Problems” section of Ch. 2, “Business Ethics” in Dynamic Business Law. This scenario

Psychiatric notes are a way to reflect on your practicum

  Psychiatric notes are a way to reflect on your practicum experiences and connect them to the didactic learning you gain from your NRNP courses. Focused SOAP notes, such as the ones required in this practicum course, are often used in clinical settings to document patient care. For this Assignment,

FIU Individualism vs Collectivism Discussion Nursing Assignment Help

I’m studying for my Health & Medical class and need an explanation. Take the quiz: Individualism vs. Collectivism Quiz: How Do You See Your Role in Society? (Links to an external site.) Where do you stand on the individualist / collectivist continuum, based on your scores? Why do you think

This machine has exactly 3 processors and your program is

This machine has exactly 3 processors and your program is supposed to read two integer values A and B and compute 3 different results:  A*B, A-B and A+B. Execute all three operations in parallel. The main mission is to write the program (only 1 program) that “forks” two other processes

1. List five of the primary obstacles to risk communication,

1.  List five of the primary obstacles to risk communication, and explain how each affects the ability of disaster managers to communicate with the public. 2. What are the different types of emergency management exercises, and why are they important? What does a community or country risk by failing to

Please provide an in depth Information Assurance strategy for the

   Please provide an in depth Information Assurance strategy for the background company Heavy Metal Engineering (HME). HME is a manufacturing organization that creates metal shell casings for very high-end washer and dryer products has suppliers and customers world-wide, as well as world-wide offices. HME is looking to receive some

Supporting Grief and Loss Social workers support clients through many

Supporting Grief and Loss Social workers support clients through many unpleasant situations. Social work roles center around simplifying those events for their clients as well as comforting clients while they endure difficult times. As with so many areas of social work, prevention is the best way to approach and minimize

As part of the application process, you are being asked

As part of the application process, you are being asked to complete a written communication piece to be 1-2 pages.   *Evidence of critical thinking by using examples or arguments     How would those close to you describe you?   Describe a failure in which you were involved. How

I need the following discussion questions in 120 words each.

I need the following discussion questions in 120 words each. Please provide references at the end of each of question MODULE 1 DQ1 Specify your major and identify your career plans. Explain how accounting might help you in your career if you are not planning to be an accountant. What

Week One – Challenges to Health and Wellness: We all

Week One – Challenges to Health and Wellness:  We all live with challenges to our health and wellness. For some it may be eating habits while others may battle time management. Others may face smoking, substance abuse, or many other challenges. This week I would like you to explore the

As we have heard, Sage emerges to be an ideal

   As we have heard, Sage emerges to be an ideal bookkeeping programming with regards to disentangling and working with an extremely different scope of business and monetary exercises. This product is used for everything from taking care of basic assignments to complex monetary frameworks. Aside from this, sage additionally

Getting Started: There is an order to our world. Without

Getting Started:  There is an order to our world. Without order, the universe would be nonexistent, as many scientists are now understanding. For those that work in the world of computing, we enjoy the ability to use technology because there is order at the smallest levels of matter, the atomic

I. Stock market: Analysis and control, Stock market portfolio management.

I. Stock market: Analysis and control,  Stock market portfolio management. Define stock market: analysis and control, and Stock market portfolio management, how both of them work and compare and contrast. II. Break even analysis  Capital investment and new business management. Define break even analysis, and capital investment and new business

All of papers you get at speedyresearchpapers.com are meant for research purposes only. The papers are not supposed to be submitted for academic credit.

Sitemap

Terms & Conditions
Privacy Policy

Use Our 6 Free Tools

  1. Thesis statement generator
  2. Words to pages converter
  3. Words to Minutes Converter for Speech
  4. Free college GPA calculator
  5. Bibliography Generator
  6. Free Plagiarism Checker
Follow us:
Facebook
Twitter
Email
© 2023. SpeedyResearchPapers.com. All Rights Reserved.
We accept:
  • support@speedyresearchpapers.com