How to use exec to do the math work in

How to use exec to do the math work in this lab?

 

Learning Objective:

To study the life cycles and deaths of stars with a focus on main sequence stars like our own Sun.

Prerequisites: Chapter 17, Chapter 18 section 1. Review Exploration from Module 1: “Math Primer for Astronomy” (note this contains link for a free online scientific calculator).

Materials Required

  • Computer and internet access
  • Textbook
  • Scientific calculator
  • Spreadsheet software like Excel
  • Digital camera 
  • Printer or drawing software
  • Save this worksheet and use it as your report template

Time Required: Between 3-3.5 hours, note that depending if you use Excel (or similar), your time will be shortened.

Introduction

infographic showing many protostars of various sizes and the phases they go through over their life-span.

Figure 1: JP Stellar Revolution

The life cycle of the stars is one of the most fascinating studies of astronomy.Stars are the building blocks of galaxies and by looking at their age, composition and distribution we can learn a great deal about the dynamics and evolution of that galaxy. Stars manufacture the heavier elements including carbon, nitrogen and oxygen which in turn will determine the characteristics of the planetary systems that form around them. It is the mass of the star which will determine its life cycle and this all depends on the amount of matter that is available in its nebula. Each star will begin with a limited amount of hydrogen in their cores. This lifespan is proportional to (f M) / (L), where f is the fraction of the total mass of the star, M, available for nuclear burning in the core and L is the average luminosity of the star during its main sequence lifetime. The larger the mass, the shorter the lifespan ending in a beautiful supernova, the smaller the mass, the longer the lifespan ending as a quiet brown dwarf (Fig. 1).

Main Sequence Stars

an HR diagram showing absolute magnitude, temperature, luminosity and spectral class.

Figure 2: https://imagine.gsfc.nasa.gov/

For this lab we will focus on stars similar to our own Sun (up to 1.4MassSun ), main sequence stars. A star that is similar in size to our Sun will take approximately 50 million years to mature from the beginning of their collapse to becoming an “adult” star. Our Sun, after reaching this mature phase, will stay on the main sequence of the HR-diagram for approximately 10 billion years (Fig. 2). Stars like our Sun are fueled by the nuclear fusion of hydrogen forming into helium at their cores. It is this outflow of energy that provides the outward pressure necessary to keep the star from collapsing under its own weight. And in turn, this energy determines the luminosity of the stars.

Death of Our Sun

shows a telescopic image of NGC 6543

Figure 3. NGC 6543

When a low mass star like our Sun has exhausted its supply of hydrogen in its core, then there will no longer be a source of heat to support the core against the pull of gravity. Hydrogen will continue to burn in a shell around the core and the star will evolve into the phase of a red giant, growing in diameter. The core of the star will collapse under the pull of gravity until it reaches a high enough density, and it will begin to burn helium and make carbon. This phase will last about 100 million years eventually exhausting the helium and then becoming a red supergiant, growing more in diameter. This is a more brief phase and last only a few tens of thousands of years and the star loses mass by expelling a strong wind. The star eventually loses the mass in its envelope, leaving behind a hot core of carbon embedded in a nebula of expelled gas. Because the core is still hot, its radiation will ionize the nebula, which is the planetary nebula phase (Fig. 3). At the end the carbon core will cool and become a white dwarf.

White dwarfs used to be quite a mystery. Astronomers couldn’t figure out why the star didn’t continue to collapse. Quantum mechanics brought about the answer – electron degeneracy pressure. Read through this web material to learn more. In the below table you will find important data that accompanies each phase of a star like our Sun.

Table 1. Stellar Evolution of a Sun-like star. Reminder: When we are examining the physical state of a star, we have to separately consider the core (where temperature and pressure are very high), and the surface (where the temperature and pressure are considerably less). The core is where the fusion occurs and the surface is what we can visually see. Thus, we have to infer what is going on in the core by observing the envelope of the star.

Table 1 Stellar Evolution of a Sun-like Star

Phase

Duration (years)

Diameter (meters)

Density (kg/m3)

Core Temperature

(Kelvin)

Surface Temperature (Kelvin)

1. Interstellar Cloud

2.13×106

6×1017

1.67×10-18

10

10

2. Protostar

(phase 1)

106

1011

.001674

1×106

3,000

3. Protostar

(phase 2)

1×107

1×1010

16.74

5×106

4,000

4. Main Sequence Star

1×1010

1.4×109

1×105

1.5×107

5,770

5. Red Giant

1×108

4.2×109

1×107

5×107

4,000

6. Red Giant (before helium flash)

1×105

1.4×1011

1×108

1×108

4,000

7. Red Giant (after helium flash)

5×107

1.4×1010

1×107

1×108

5,000

8. Super Giant

1×104

  7×1011

1×108

   2.5 x 108

4,000

9. Carbon Core

1×105

1.4×107

1×1010

3×108

1×105

10. White Dwarf

1×10?

1.4×107

1×1010

Starts at 3×108 and cools down

Starts at 1×105 and cools down

1. Activity

Note: Even if you use Excel for your work below, you will still want to show one calculation of each type fully worked out in detail. (typed) Again, it would be helpful to review the Exploration from Module 1: “Math Primer for Astronomy” (note this contains link for a free online scientific calculator). There are also good math examples in the Appendix of our eText.

The evolution of any star is a complex process. In order for us to understand the processes that are taking place and how stars change with time scientists must apply the basic ideas of physics and chemistry to create a mathematical model of a star. By making many observations of many types of stars along with stars at various stages in their lifespan, we can use these observational clues to test these models. By plugging in many variables into sophisticated computer programs we are able to come up with a theory of stellar evolution and this, in turn, can give us the story behind every sort of object in the sky from a main sequence star, supernovae, black hole, to nebulae. Using the information from Part 1 of this lab, let’s see what we can find out about some of the phases that our Sun has and will go through.

A Balancing Act

In looking at Table 1, during the protostar stage our Sun is contracting under its own weight and this results in a rising temperature. Looking back to the ideal gas law, in Chapter 14, we find:

Pressure x Volume = (Number of particles) x (k) x (Temperature of the gas)

or

PV =nkT

where k = 1.38 x 10-23 [joule/K] is Boltzmann’s constant.  This law applies to all gases consisting of simple, freely flying particles, like in our Sun.  We can also relate this formula to the forces being applied.

force divided by area equations

In a star, the pressure will always be changing with the radius, and this keeps the star from collapsing. At each layer, the outward push of the gas is balanced by the inward pull of gravity on the gas. In looking at the above relationship between the variables, if one changes then the others must change to balance the equation out. Thus:

  1. As our Sun is in the phase of Interstellar Cloud, describe what force is acting while the cloud is collapsing.
  2. Describe also what is taking place in terms of conservation of energy, what is happening to the kinetic and potential and thermal energy as the cloud is collapsing?
  3. For each of the Protostar phases calculate the luminosity using: π{“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi>L</mi><mo>=</mo><mo>(</mo><mi>&#x3C3;</mi><msup><mi>T</mi><mrow><mn>4</mn><mo>&#xA0;</mo></mrow></msup><mo>)</mo><mo>&#xA0;</mo><mo>&#xD7;</mo><mo>(</mo><mn>4</mn><msup><mi>&#x3C0;r</mi><mrow><mn>2</mn><mo>&#xA0;</mo><mo>&#xA0;</mo></mrow></msup><mo>)</mo><mspace linebreak=”newline”></mspace><mspace linebreak=”newline”></mspace></math>”}, which is power (energy per second per unit area) times the surface area.  (L: luminosity in Watts {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi>&#x3C3;</mi><mo>=</mo><mn>5</mn><mo>.</mo><mn>67</mn><mo>&#xD7;</mo><msup><mn>10</mn><mrow><mo>-</mo><mn>8</mn></mrow></msup><mfenced open=”[” close=”]”><mrow><mfenced><mrow><mi>W</mi><mo>/</mo><msup><mi>m</mi><mn>2</mn></msup></mrow></mfenced><mo>/</mo><msup><mi>K</mi><mn>4</mn></msup></mrow></mfenced><mspace linebreak=”newline”></mspace></math>”} the Stefan-Boltzmann constant; T: temperature in Kelvin π{“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi mathvariant=”normal”>&#x3C0;</mi></math>”}= 3.14; r: radius in meters)
    1. Calculate luminosity of  Protostar phase 1:
    2. Calculate luminosity of  Protostar phase 2:
    3. What was the difference in luminosity between the two phases?
    4. What was the surface area 4πr2 for each Protostar phase?  How much did it change?
    5. What variable, surface temperature or radius affected the luminosity the most during the change from Protostar phase 1 to 2? Why? (Hint: think of percent increase or decrease.) Online calculator

Main Sequence Phase

Once our Sun was about 13 million years old and had reached a temperature of approximately {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><msup><mn>10</mn><mn>7</mn></msup></math>”}Kelvin, a special process was about to take place. The luminosity also settles down to around {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>26</mn></msup></math>”}Watts. It is during this time that the process of fusing hydrogen takes place, two atoms of hydrogen coming together to produce helium.

  1. How many reaction cycles per second was our Sun fusing hydrogen in order to release enough energy to radiate {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>26</mn></msup></math>”}Watts? (Hints: Each fusion reaction cycle yields {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>.</mo><mn>3</mn><mo>&#xD7;</mo><msup><mn>10</mn><mrow><mo>-</mo><mn>12</mn></mrow></msup></math>”}Joules, and Watt is a unit of power = [Joules/second], and you are wanting to find a number of units [1/seconds].)
  2. If each reaction cycle yields {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>.</mo><mn>3</mn><mo>&#xD7;</mo><msup><mn>10</mn><mrow><mo>-</mo><mn>12</mn></mrow></msup></math>”}Joules, how much mass per second is the Sun converting into energy? (hint: use Einstein’s equation {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi>E</mi><mo>=</mo><mi>m</mi><msup><mi>c</mi><mn>2</mn></msup></math>”}and solve for mass, E = energy for each reaction cycle, M = mass in kilograms, c = speed of light {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>3</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>8</mn></msup></math>”}[meters/second]; note that units of Joules = {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mfenced open=”[” close=”]”><mfrac><mrow><mi>k</mi><mi>g</mi><mo>&#xB7;</mo><msup><mi>m</mi><mn>2</mn></msup></mrow><msup><mi>s</mi><mn>2</mn></msup></mfrac></mfenced></math>”}, this will give you (mass converted /reaction). Then you can multiply that number by what you found in A., which was (# reactions/second) ending up with (mass/second).
  3. Explain why the Sun is at equilibrium during this phase of main sequence.
  4. Create a table similar to the one at the end of this lab, titled “Luminosity Table” to put in your lab report. Fill in the luminosity stated above for the main sequence line.

Red Giant Phase

In the main sequence phase, the Sun’s diameter is {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>1</mn><mo>.</mo><mn>39</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>9</mn></msup></math>”} meters and has a mass of {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>2</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>30</mn></msup></math>”} kg. This tells us it has a mean density of approximately {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>1400</mn><mo>&#xA0;</mo><mi>k</mi><mi>g</mi><mo>/</mo><msup><mi>m</mi><mn>3</mn></msup></math>”}. We can compare that to the density of water, which is {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>1000</mn><mo>&#xA0;</mo><mi>k</mi><mi>g</mi><mo>/</mo><msup><mi>m</mi><mn>3</mn></msup></math>”}

  • What is the mean density of the Sun as it is in its Red Giant phase? Hint: ({“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi>d</mi><mi>e</mi><mi>n</mi><mi>s</mi><mi>i</mi><mi>t</mi><mi>y</mi><mo>=</mo><mfrac><mrow><mi>m</mi><mi>a</mi><mi>s</mi><mi>s</mi></mrow><mrow><mi>v</mi><mi>o</mi><mi>l</mi><mi>u</mi><mi>m</mi><mi>e</mi></mrow></mfrac></math>”} and π{“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mi>v</mi><mi>o</mi><mi>l</mi><mi>u</mi><mi>m</mi><mi>e</mi><mo>=</mo><mfrac><mn>4</mn><mn>3</mn></mfrac><msup><mi>&#x3C0;r</mi><mn>3</mn></msup></math>”}, and assume that the mass remains roughly the same.)
  • If the Sun’s diameter continues to increase, what will happen to the density? Explain your answer.
  • Calculate the luminosity of the Sun at this phase. (Use equation from above and put this number into your Luminosity table for the Red Giant phase.) Hint: You can create a spreadsheet with the luminosity formula and data from Table. 1, this would allow you to calculate the luminosities quite quickly. Make sure to show at least one sample calculation done by hand. How to Create Formulas and Make Calculations.

Red Giant – before helium flash phase

: “triple-alpha process”: two helium nuclei collide and fuse to make beryllium, releasing energy, but before the beryllium can break down another helium collides with it to form carbon, releasing more

Figure4. Institute for Astronomy

Up to the time before the helium flash the core temperature continues to rise and reaches {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><msup><mn>10</mn><mn>8</mn></msup></math>”} Kelvin, and a core density of {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><msup><mn>10</mn><mn>8</mn></msup><mi>k</mi><mi>g</mi><mo>/</mo><msup><mi>m</mi><mn>3</mn></msup><mspace linebreak=”newline”></mspace></math>”}. At this point the helium fuses to ignite a “triple-alpha process”: two helium nuclei collide and fuse to make beryllium, releasing energy, but before the beryllium can break down another helium collides with it to form carbon, releasing more energy. This helium flash releases more energy than had been radiated over 30,000 years while the Sun was in its main sequence phase, all in just a few seconds.

  1. If the helium flash released 30,000 years worth of energy (as in the main sequence phase) in just 10 seconds, what would be the amount of power that was radiated?  Hint: (Remember your units!  How many seconds are in a year?  If the luminosity was {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>26</mn></msup></math>”}Watts?  Power=Watttime, power has units of [Joules])
  2. Compare that power to what a single hurricane might generate, {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>1</mn><mo>.</mo><mn>3</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>17</mn></msup></math>”}Joules in one day, which is equivalent to about half the world wide electrical generating capacity.  Does that even come close to the number you calculated?
  3. Calculate the luminosity of the Sun at this phase. (Use equation from above and put this number into your Luminosity table.)

Red Giant – helium fusion after helium flash phase

Over the next {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><msup><mn>10</mn><mn>5</mn></msup></math>”} years the core settles into stable helium fusion surrounded by a shell of hydrogen fusion. During the helium flash, this explosive event would produce strong convection currents in the outer envelope of the Sun and perhaps blow out 20-30% of it out into space. In turn, the outer envelope of gas gets hotter. The core will consume the helium quickly because of the high temperature, the triple-alpha fusion lasting maybe on a few million years.

  1. Calculate the luminosity of the Sun at this phase. (Use equation from above and put this number into your Luminosity table.)

Red Giant becomes Super Giant

By this time helium is running out of the core, which is mostly carbon now surrounded by a shell of fusing helium and an outer shell of fusing hydrogen. The core is small and massive and heating up. Eventually, the fusion days are coming to an end. The hydrogen shell dumps helium ash onto the helium fusion shell, then the helium shell dumps its carbon ash into the carbon core. The core continues to contract, which shrink the outer shells. Again temperatures rise and as a result the star bloats up again but even bigger into a super giant.

   A. For the Super Giant phase calculate the average density. (Hint: use the above equation for density, assume the mass is still {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>2</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>30</mn></msup></math>”} kg.)

  1. Calculate the luminosity of the Sun at this phase. (Use equation from above and put this number into your Luminosity table.)

After the Super Giant phase

Finally all of the available gravitational energy is spent. The fusion stops, leaving a carbon core. But just before the core goes out, the outer envelope is transformed. During this period, a number of helium flashes can occur, destabilizing the gas and causing pulsations. The gas would rise and fall a few times until finally it rises fast enough to escape from the core – and we will see a beautiful planetary nebula.

The Carbon Core

By this time our Sun is not shining by fusion, and no longer technically a star, but it is back in equilibrium.  

White Dwarf

At this point our Sun starts to cool off and radiate light.

  1. For the surface temperature of {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><msup><mn>10</mn><mn>5</mn></msup></math>”}Kelvin, what is the initial luminosity of the white dwarf?
  2. How do you think the luminosity will change over time?
  3. Convert your luminosities in the below table to solar units (by dividing each by {“version”:”1.1″,”math”:”<math xmlns=”http://www.w3.org/1998/Math/MathML”><mn>4</mn><mo>&#xD7;</mo><msup><mn>10</mn><mn>26</mn></msup></math>”}Watts). Hint: this will be very easy if you have created an Excel spreadsheet with the luminosity formula. Please upload your Excel file to the assignment folder with your lab report.
  4. Print out the below HR Diagram plot and label each of your luminosities in pencil from the Luminosity Table you create. (Note: if you have drawing software, you can use the image and draw the below.)
    1. Draw an arrow in the direction the path will follow from one phase to the next.
    2. Draw a path from the Super Giant phase to where you think the Sun will end up. (Remember, over time how this path would look on the HR Diagram.)

Luminosity Table (to create and place in your lab report)

Phase

Luminosity (in Watts)

4. Main Sequence Star

5. Red Giant

6. Red Giant (before helium flash)

7. Red Giant (after helium flash)

8. Super Giant

HR Diagram (print out, and follow instructions to fill it in, and place in your lab report)

HR Diagram

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Related Questions

The purpose of this assignment is to explain the importance

The purpose of this assignment is to explain the importance of each phase of a system life cycle and the major stakeholder roles in a new system implementation.  Requirements: Create an audiovisual or PowerPoint presentation with speaker notes, that addresses:  The system life cycle process and the role of employees

1. The length of the summary for each article should

1. The length of the summary for each article should be between 15-30 lines (single-spaced, Times New Roman, 12-point font, 1-inch margins). Please use a space between the paragraphs. 2. Please make sure to separate each article and case by the title of the article or case in bold format.

Describe their current vision of “a good life” Illustrate how

  Describe their current vision of “a good life” Illustrate how and to what extent their personal experiences condition their vision of “a good life” Assess how one’s social location might enable or constrain the ability of some to achieve this vision Provide a preliminary writing sample on which the

Purpose of Life Essay

(1) What three personal values best describe you? Assume someone challenges you and says, “That’s not true!” Defend each characteristic you listed with a real experience that exemplifies it is true. (2) The five values at Cal State East Bay are: Truth, Justice, Compassion, Partnership and Community. Write about whether

To what extent was US interventionism designed to spread US

American Interventionism To what extent was US interventionism designed to spread US imperialism from 1900 to 2003. The exam board is AQA and the rewrite needs to stick to the two original interpretations set out in the first paragraph. The definitions for interventionism and imperialism can be removed Another two

Read the following articles: https://www.healthit.gov/topic/health-it-and-health-information-exchange-basics/what-hie https://www.sciencedirect.com/science/article/pii/S1110866520301365 https://journalofethics.ama-assn.org/article/electronic-health-records-privacy-confidentiality-and-security/2012-09 1. After reading

   Read the following articles: https://www.healthit.gov/topic/health-it-and-health-information-exchange-basics/what-hie  https://www.sciencedirect.com/science/article/pii/S1110866520301365 https://journalofethics.ama-assn.org/article/electronic-health-records-privacy-confidentiality-and-security/2012-09  1. After reading the assigned materials/ links and going through the lecture, you should be able to understand how electronic data storage and mapping is important for success in a healthcare entity. Select one question and provide a detailed response in a

iscussion 7B: Poetry In Business No unread replies.No replies. Most

  iscussion 7B: Poetry In Business No unread replies.No replies. Most people can see how poetry can highlight people’s creativity and allow people to express their emotions. However, many people many not see the connection of how a knowledge of poetry can apply to professional settings. To prepare for this

17. Teachings from Siddhartha Words of Wisdom: Intro to Philosophy

  17. Teachings from Siddhartha     Words of Wisdom: Intro to Philosophy | OER Commons  1. Choose one of the philosophers from this week’s readings (Teachings from Siddhartha). Explain why you were drawn to this particular person and what you learned. 2. What were you taught about people from other cultures?

The Assignment What group therapy techniques were demonstrated? How well

  The Assignment What group therapy techniques were demonstrated? How well do you believe these techniques were demonstrated? What evidence from the literature supports the techniques demonstrated?  What did you notice that the therapist did well? Explain something that you would have handled differently. What is an insight that you

This Self-Reflection P should explore your personal beliefs, values, unconscious

 This Self-Reflection P should explore your personal beliefs, values, unconscious biases, ethical considerations, feelings and reactions related to working with individuals who have received a mental health diagnosis.   In your P, reflect on the following questions: Review your self-reflection from the first week. How may have your beliefs, values,

Suppose that you are part of a virtual team and

  Suppose that you are part of a virtual team and must persuade other team members on an important matter (such as switching suppliers or altering the project deadline).  Assuming that you cannot visit these people in person, and you have no positional authority, what can you do to maximize

Does an instructor’s own learning style preferences affect the way

 Does an instructor’s own learning style preferences affect the way the instructor teaches? Does it matter?    Support your point of view with citations from two sources.  One must be a peer-reviewed source (textbooks are not peer-reviewed sources), and the other may be any credible source, including educational websites. Please

in a 200- 250 paragraph answer all the question below

in a 200- 250 paragraph answer all the question below and Include images of the artworks you’re discussing in your thread. (all in your own words)  Lecture 11 and textbook Chapter 12 (Clan) introduced you to the potlatch ceremony of the Northwest Coast Native people.  What is the function of

250 words Research an example of how the codes of

Premium Paper Help is a professional writing service that provides original papers. Our products include academic papers of varying complexity and other personalized services, along with research materials for assistance purposes only. All the materials from our website should be used with proper references.

Read the book: Narrative and Numbers: The Value of Stories in

Please read the book: Narrative and Numbers: The Value of Stories in Business, Aswath Damodaran. This book addresses how “storytellers can better incorporate and narrate numbers and how number-crunchers can calculate more imaginative models that withstand scrutiny.” You will do a write-up on the book-minimum of five (5) pages (750

Here an experiment was done: https://www.researchgate.net/publication/249998034_Experimental_estimates_of_peak_skin_dose_and_its_relationship_to_the_CT_dose_index_using_the_CTDI_head_phantom and I uploaded the

Here an experiment was done: https://www.researchgate.net/publication/249998034_Experimental_estimates_of_peak_skin_dose_and_its_relationship_to_the_CT_dose_index_using_the_CTDI_head_phantom and I uploaded the proposal of my research. What I am looking for is to write done thesis research similar to what they have because the two experiments are close. I would like you to write Abstract, introduction (  with background), methods and procedures.

1. Consider the following: How is data analytics different from

1. Consider the following: How is data analytics different from statistics?  What are the main differences between descriptive,      predictive, and prescriptive analytics tools? How do businesses use analytics to convert raw      operational data into actionable information? Reflect on the following in a minimum of 500 words. Think about the organization