Login
Order Now

Our Services

Get 15% Discount on your First Order

Order Now

Lab – Building a Switch and Router Network Lab – Building a Switch and Router Network Topology

Lab – Building a Switch and Router Network

Lab – Building a Switch and Router Network

Topology


Addressing Table

Device

Interface

IP Address

Subnet Mask

Default Gateway

R1

G0/0

192.168.0.1

255.255.255.0

N/A

G0/1

192.168.1.1

255.255.255.0

N/A

PC-A

NIC

192.168.1.3

255.255.255.0

192.168.1.1

PC-B

NIC

192.168.0.3

255.255.255.0

192.168.0.1

Objectives

Part 1: Set Up the Topology and Initialize Devices

Part 2: Configure Devices and Verify Connectivity

Part 3: Display Device Information

Background / Scenario

This is a comprehensive lab to review previously covered IOS commands. In this lab, you will cable the equipment as shown in the topology diagram. You will then configure the devices to match the addressing table. After the configurations have been saved, you will verify your configurations by testing for network connectivity.

After the devices have been configured and network connectivity has been verified, you will use IOS commands to retrieve information from the devices to answer questions about your network equipment.

This lab provides minimal assistance with the actual commands necessary to configure the router. Test your knowledge by trying to configure the devices without referring to the content or previous activities.

Note: The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with Cisco IOS Release 15.2(4)M3 (universalk9 image). The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Other routers, switches, and Cisco IOS versions can be used. Depending on the model and Cisco IOS version, the commands available and output produced might vary from what is shown in the labs. Refer to the Router Interface Summary Table at the end of this lab for the correct interface identifiers.

Note: Ensure that the routers and switches have been erased and have no startup configurations. Consult with your instructor for the procedure to initialize and reload a router and switch.

Required Resources

1 Router (Cisco 1941 with Cisco IOS Release 15.2(4)M3 universal image or comparable)

1 Switch (Cisco 2960 with Cisco IOS Release 15.0(2) lanbasek9 image or comparable)

2 PCs (Windows 7 or 8 with terminal emulation program, such as Tera Term)

Console cables to configure the Cisco IOS devices via the console ports

Ethernet cables as shown in the topology

Note: The Gigabit Ethernet interfaces on Cisco 1941 routers are autosensing and an Ethernet straight-through cable may be used between the router and PC-B. If using another model Cisco router, it may be necessary to use an Ethernet crossover cable.

Set Up Topology and Initialize Devices

Cable the network as shown in the topology.

Attach the devices shown in the topology diagram, and cable, as necessary.

Power on all the devices in the topology.

Initialize and reload the router and switch.

If configuration files were previously saved on the router and switch, initialize and reload these devices back to their basic configurations.

Configure Devices and Verify Connectivity

In Part 2, you will set up the network topology and configure basic settings, such as the interface IP addresses, device access, and passwords. Refer to the Topology and Addressing Table at the beginning of this lab for device names and address information.

Assign static IP information to the PC interfaces.

Configure the IP address, subnet mask, and default gateway settings on PC-A.

Configure the IP address, subnet mask, and default gateway settings on PC-B.

Ping PC-B from a command prompt window on PC-A.

Why were the pings not successful?

____________________________________________________________________________________

Configure the router.

Console into the router and enable privileged EXEC mode.

Enter configuration mode.

Assign a device name to the router.

Disable DNS lookup to prevent the router from attempting to translate incorrectly entered commands as though they were host names.

Assign
class as the privileged EXEC encrypted password.

Assign
cisco as the console password and enable login.

Assign
cisco as the VTY password and enable login.

Encrypt the clear text passwords.

Create a banner that warns anyone accessing the device that unauthorized access is prohibited.

Configure and activate both interfaces on the router.

Configure an interface description for each interface indicating which device is connected to it.

Save the running configuration to the startup configuration file.

Set the clock on the router.

Note: Use the question mark (
?) to help with the correct sequence of parameters needed to execute this command.

Ping PC-B from a command prompt window on PC-A.

Were the pings successful? Why?

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

Display Device Information

In Part 3, you will use
show commands to retrieve information from the router and switch.

Retrieve hardware and software information from the network devices.

Use the
show version command to answer the following questions about the router.

What is the name of the IOS image that the router is running?

____________________________________________________________________________________

How much DRAM memory does the router have?

____________________________________________________________________________________

____________________________________________________________________________________

How much NVRAM memory does the router have?

____________________________________________________________________________________

How much Flash memory does the router have?

____________________________________________________________________________________

Use the
show version command to answer the following questions about the switch.

What is the name of the IOS image that the switch is running?

____________________________________________________________________________________

How much dynamic random access memory (DRAM) does the switch have?

____________________________________________________________________________________

How much nonvolatile random-access memory (NVRAM) does the switch have?

____________________________________________________________________________________

What is the model number of the switch?

____________________________________________________________________________________

Display the routing table on the router.

Use the
show ip route command on the router to answer the following questions.

What code is used in the routing table to indicate a directly connected network? _____

How many route entries are coded with a C code in the routing table? _________

What interface types are associated to the C coded routes?

_______________________________________________________________________________________

Display interface information on the router.

Use the
show interface g0/1 to answer the following questions.

What is the operational status of the G0/1 interface?

_______________________________________________________________________________________

What is the Media Access Control (MAC) address of the G0/1 interface?

_______________________________________________________________________________________

How is the Internet address displayed in this command?

_______________________________________________________________________________________

Display a summary list of the interfaces on the router and switch.

There are several commands that can be used to verify an interface configuration. One of the most useful of these is the
show ip interface brief command. The command output displays a summary list of the interfaces on the device and provides immediate feedback to the status of each interface.

Enter the
show ip interface brief command on the router.

R1#
show ip interface brief

Interface IP-Address OK? Method Status Protocol

Embedded-Service-Engine0/0 unassigned YES unset administratively down down

GigabitEthernet0/0 192.168.0.1 YES manual up up

GigabitEthernet0/1 192.168.1.1 YES manual up up

Serial0/0/0 unassigned YES unset administratively down down

Serial0/0/1 unassigned YES unset administratively down down

R1#

Enter the
show ip interface brief command on the switch.

Switch#
show ip interface brief

Interface IP-Address OK? Method Status Protocol

Vlan1 unassigned YES manual up up

FastEthernet0/1 unassigned YES unset down down

FastEthernet0/2 unassigned YES unset down down

FastEthernet0/3 unassigned YES unset down down

FastEthernet0/4 unassigned YES unset down down

FastEthernet0/5 unassigned YES unset up up

FastEthernet0/6 unassigned YES unset up up

FastEthernet0/7 unassigned YES unset down down

FastEthernet0/8 unassigned YES unset down down

FastEthernet0/9 unassigned YES unset down down

FastEthernet0/10 unassigned YES unset down down

FastEthernet0/11 unassigned YES unset down down

FastEthernet0/12 unassigned YES unset down down

FastEthernet0/13 unassigned YES unset down down

FastEthernet0/14 unassigned YES unset down down

FastEthernet0/15 unassigned YES unset down down

FastEthernet0/16 unassigned YES unset down down

FastEthernet0/17 unassigned YES unset down down

FastEthernet0/18 unassigned YES unset down down

FastEthernet0/19 unassigned YES unset down down

FastEthernet0/20 unassigned YES unset down down

FastEthernet0/21 unassigned YES unset down down

FastEthernet0/22 unassigned YES unset down down

FastEthernet0/23 unassigned YES unset down down

FastEthernet0/24 unassigned YES unset down down

GigabitEthernet0/1 unassigned YES unset down down

GigabitEthernet0/2 unassigned YES unset down down

Switch#

Reflection

If the G0/1 interface showed administratively down, what interface configuration command would you use to turn the interface up?

_______________________________________________________________________________________

What would happen if you had incorrectly configured interface G0/1 on the router with an IP address of 192.168.1.2?

_______________________________________________________________________________________

_______________________________________________________________________________________



© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page
1 of
5

© 2018 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page
5 of
5

image1.png

image2.jpeg

Share This Post

Email
WhatsApp
Facebook
Twitter
LinkedIn
Pinterest
Reddit

Order a Similar Paper and get 15% Discount on your First Order

Order Now

Related Questions

Discuss the teacher–coach role conflict. (These are the people who

Discuss the teacher–coach role conflict. (These are the people who was hired by the district to teach and coach) 1) Does the dual role teacher/coach take both responsibilities seriously? 2) Are both jobs approached with equal emphasis and importance? (Not necessarily equal time) 3) What experiences did you have with

Using the American association of maternal and child health, please

Using the American association of maternal and child health, please fill out to the best of your ability for the performance management assignment.  -. Identify at least 5 links between the description of the job and the organization’s goals, objectives and strategic plan. -. Develop an outline of at least

Case Instructions Case: Does This Milkshake Taste Funny? In this

Case InstructionsCase: Does This Milkshake Taste Funny?In this case, George Stein is faced with an ethical dilemma. Identify that dilemma and the stakeholders affected by it. I would like you to address all of the reasons why you believe George will act UNETHICALLY and remove the filters, allowing the maggots

Chapter 10: Risk Monitoring and ControlInitial Postings: Read and reflect

Chapter 10: Risk Monitoring and ControlInitial Postings: Read and reflect on the assigned readings for the week. Then post what you thought was the most important concept(s), method(s), term(s), and/or any other thing that you felt was worthy of your understanding in each assigned textbook chapter.Your initial post should be

Leveraging Search Technologies

 Identify an organization that is using at least one online search technology. Briefly describe the organization, and then answer these questions: Of the various types of search technologies, which ones are they utilizing? Why is the organization using these technologies? What are the benefits? What are some metrics the organization

CCN Personal Health Record Discussion Nursing Assignment Help

need an answer to the post below: Good evening classmates and professor,     Personal health records (PHR) have been developed so that computerized medical records are readily available to patients. As in the case study, the pros of having a PHR account is having medical records access Allowing patients to view

Discussion: Psychology of Personality Research Topics Seligman (2011) described well-being

Discussion: Psychology of Personality Research Topics Seligman (2011) described well-being as the psychological construct that involves engaging with life, experiencing meaningful/positive relationships, having a sense of life purpose, feeling positive emotions, and embracing opportunities for experiencing a sense of accomplishment. Reference:Bates, W. (2011). Flourish: A visionary new understanding of happiness and

Please see attached for further details You are a project

 Please see attached for further details You are a project manager for an urgent and complex project. This project is triggered by unfavorable compliance findings and requires significant changes in technology, specifically in the tracking system and Web-based, order-processing system. You are facing a very tight schedule and must complete

Case Analysis: 1 of 4 – Case 1 Chapter 1

Case Analysis: 1 of 4 – Case 1 Chapter 1 Costco (Parnell p. 17) Use this book to answer the first 15 questions  Before starting your work, you will want to preview the objectives in the assignment’s rubric. For example, the rubric could require Biblical Integration. Reviewing your rubrics reminds

Please turn in your Application Assignment 5 here. You can Nursing Assignment Help

Please turn in your Application Assignment 5 here. You can find a description of the assignment, questions, and a rubric below. Here is a student example Download student example, another example  Download another example and tips included here.  Download tips included here. Remember these are just examples. What: In this assignment, you are aiming to demonstrate the following objectives:

Epidemiology of Malaria

Please follow these guidelines: 1, Abstract 2. Introduction of disease – nature of disease – if chronic or acute, infectious or not, disease agent or underlying causes – Clinical picture – symptoms of disease, treatment 3. Descriptive epidemiology – Number of people infected or affected today (number of deaths, if

 Using Maslow’s Hierarchy of Needs (1943), what specific qualitative and quantitative organizational metrics are cross-functional, providing business

 Using Maslow’s Hierarchy of Needs (1943), what specific qualitative and quantitative organizational metrics are cross-functional, providing business acumen growth between managers and the human resources department? What specifically identified resources will support the growth of the business while promoting strong business acumen to provide long-term strategic success for the organization?  

Cancer Journal Nursing Assignment Help

Cancer Journal Your treatment plan for cancer was Radiotherapy which was effective. Now, Toss a coin to determine the final prognosis. Heads (you live), tails (you die). Answer the following questions in your journal. What is your final prognosis? How do physicians determine whether one is ‘cured’ of this type

For this assignment, please use the Cyberactive Blackboard application in

  For this assignment, please use the Cyberactive Blackboard application in use at Bellevue University. 1. Create 15 or more User Stories concerning the Blackboard application.     a. NUMBER YOUR USER STORIES!     b. The user for all 15 user stories must be “Student”.     c. You may describe an existing

Neil Postman’s Amusing Ourselves to Death that addresses the changes

 PURPOSE This essay assignment is meant to test and measure the skills that you will need to be successful in a critical thinking course. It will ask you to analyze rhetorical strategies, reliability, ideas, and evidence in a non-fiction text, construct an argument that explores complex academic issues, and find,

· When solving problems, you must clearly explain all the

·  When solving problems, you must clearly explain all the steps you are doing, and why are you making those steps. ·  Show all your workings, a numeric answer is not enough. ·  You should submit a document in Word format. ·  You should submit a document in Excel format

Assume you are in charge of securing your organization’s applications

Assume you are in charge of securing your organization’s applications and associated data in the cloud. The transfer of data to and from the cloud is already encrypted. Answer the following question(s): Should you encrypt data before transferring it to the cloud or encrypt it after it is stored in

All of papers you get at speedyresearchpapers.com are meant for research purposes only. The papers are not supposed to be submitted for academic credit.

Sitemap

Terms & Conditions
Privacy Policy

Use Our 6 Free Tools

  1. Thesis statement generator
  2. Words to pages converter
  3. Words to Minutes Converter for Speech
  4. Free college GPA calculator
  5. Bibliography Generator
  6. Free Plagiarism Checker
Follow us:
Facebook
Twitter
Email
© 2023. SpeedyResearchPapers.com. All Rights Reserved.
We accept:
  • support@speedyresearchpapers.com